Uploud:
ID:
Size:
Width: Px
Height: Px
Source:

Applying The Veneer. Applying the veneer is a simple but time consuming. I will give you as many pointers as I can to aid you in this process. You will have to cut the veneer to fit it to your kitchen face frame and display case end panels. This is pretty straightforward, measure the pieces you should have and cut them to match. One of the best ways to cut veneer is to use a good sharp utility silverware and a metal direct edge. You will want to use a sacrificial sheet of plywood or mdf under your cutting. When ever cutting for the face structure pieces of your cabinets generally try to be as exact as possible so you do not have to trim the veneer when it is added to the cabinets, its okay if it's a 1/32 micron over and you have use a block up plane or a sanding clog up to fine tune it, no more than that you will have to try to cut it even and that can cause problems, so accuracy is important here. Once you have every one of the cabinet face frames and ends covered you can begin installing your new cabinet entrance doors.

Image Editor

Veterinariancolleges-

You can edit this image using this Veterinariancolleges Tool before save to your device

You May Also Like